About SuperCoat

 A water-based, state-of-the-art, non-toxic, non-flammable and non-corrosive liquid polymer coating – SuperCoat is a non-hazardous, environmentally-safe product, suitable for a wide range of residential, commercial, industrial, marine and automotive applications. SuperCoat adheres well to metal, steel, aluminum, asphalt, concrete, fiberglass, PVC, rubber and wood surfaces, and dries quickly to a rock-hard finish. SuperCoat is flexible at temperature extremes and is resistant to many environmental hazards such as impact, salt, moisture, rust/corrosion, chemicals, acids, oil, gasoline, UV rays and extreme hot & cold temperatures. No primer required! SuperCoat can be ordered in any shade of color in quantities of 5 gallons or more.


SuperCoat remains waterproof and will not crack, peel, split, warp, or flake even after heavy abuse.
SuperCoat becomes a non-slip safety surface with the sprinkling of some grit on the top layer.
Non-toxic, non-flammable, anti-corrosion, anti-rust
100% flexible at all temperatures
Withstands temperatures up to 300° c / 572° f
Resistant to acids (hydrochloric, nitric and sulfuric)
Fluorescent pigment available – providing clear visual safety benefits


The longevity of SuperCoat means less frequent need to reapply, saving money and time.
Seals, reinforces & rejuvenates wood, siding, driveways, asphalt & concrete surfaces
Coat and repair all surfaces – including cracks and holes
Rust repair, good spread ability
Isolates metal from moisture thus preventing steel rust
Fluorescent pigment available – providing clear visual safety benefits


Surface must be clean & dry – do not apply over top of another coating that can peel or crack under SuperCoat. Can be applied to metal, fiberglass, wood, concrete, rubber, asphalt surfaces
No primer required! Simply roughen the surface using sandpaper. Can be applied with a paint roller (use longer napes) – paint brush or spray gun. Use a Tip.25 spray no higher than 10 inches from surface to seal, reinforce & rejuvenate. Apply 2 – 3 coats for maximum protection.
Apply in temperatures above 50 f / 10 c. Should be dry in 10-20 mins.
Cleanup or rinse with warm water
One gallon covers 100 square feet with one coat on a typical surface. On siding, one gallon covers 12 sq.m / 130 sq.ft. with one coat.